Відео

Not necessarily true for all units. Contactors don't go bad often. Maybe a bug nest or something keeps it from going in.

I wouldn't even bother. You need a new system. It's a R-22 system. I'm not going to try to fix something, and then after I get it done. Somebody pissed off with me because it doesn't work. And they spent all that money! 😂

Thats too much nitro

Wow, I can't wait to stay tuned so I can see how the pressure goes up on your AC charge. 😀 Thank you for this great video the HVAC sealer sweatpants gang!

No music just speak information

What do you charge for a P-Tac cleaning?

Are there any companies in Massachusetts or the Rhode Island area that can replace a thru-the-wall AC unit for a tennant of mine? I've called several companies, but every place says they either only service their own products or only handle central AC units. Thanks

Thanks for doing the vid and saving me some $. I was about to buy a fancy removal tool. I'll just close the service port before swapping schraders. 😎

Started off good. Background music got too loud. Please lower the music. Great and useful information if I could hear the rest!! Thanks for sharing though.

Love the quick tips on ac. Good man Louie!

do you have to do anything to the exterior or interior to waterproof it if the new unit is smaller than the old one/old sleeve?

Are contacters universal on AC units?

Could you place a smaller Thru the wall (non slide out chassis) AC unit into an existing case instead of another smaller slide out chassis unit? Is there any long term issues with using an existing case with a smaller slide out chassis unit, like performance, extra condensation build up, the unit having a shorter overall life?

I just installed one into my apartment wall unit. Is the frame supposed to be off since it sits into the sleeve ?

way cool video i just tested this on my Mini split. I'm happy to say I hooked up the drain line correctly! good to know

DO NOT PUT SPEEDY DRY IN THAT MUCH OIL.

This is absolutely how you DO NOT REMOVE AN OIL TANK. Why on earth would you create all that unusable sludge? You remove the sludge by bucket. If you want to know how to remove an oil tank competently go to my channel. Jacobs Property Solutions Oil Tank Removal.

Respect the grind my guy. Keep up the good work also you should probably give them a hand

Why the hell does Home Depot and Lowes sell "black iron" and "black steel" pipes and fittings? Is there a difference and can they be br used together?

❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤🦄🦄🦄🦄🦄🦄🦄🦄🦄🦄🦄🦄🦄🦄🦄🦄🦄🦄🦄🦄🦄🦄🦄🦄

How long did the installation take from start to finish?

How long did it take to do the installation from start to finish?

I put 2 new fan motors on my unit both of them both of them went bad in days. What could be the issue before I go get a 3rd one??

Beautiful job! The only thing i would reccomend is to not put the union for the gas valve inside the jacket always keep it on the outside. Nice job

What water heater did u get

Good job brother! I’m a hvac tech here in Dallas Texas and it’s a awesome career

You keep saying 100% confirmed and you want to confirm but you did none of that. Quit being a hack job and do right by these homeowners.

Just pull the other 2 legs off and grab your multi meter to check the windings and for shorts.

Megapress has made these completely obsolete. Got a leak at a fitting? Just cut the pipe 3 inches away and unthread and redope then reassemble with a slip coupling over the cut and press. Done in 5 minutes. I just got called in on a new 1in gas service where the previous guy forgot to tighten the 2nd nipple in a 300ft run of pipe then ghosted the customer whrn it failed pressure testing. Other plumber wanted 4k to disassemble the entire run. I did it for a minimum service call plus 75 for the slip coupling. Saved her 2 days and 3600 bucks.

Do they have to be identified with a tag or marking so the next person knows that there is a joint that can split the line? I would be pissed to cut the line and then find that coupling 6 inches over.

😅😅😅 ???????

WEPA 😂❤

It's not a hot water heater. It's just a water heater. Hot water doesn't need to be heated.

The Mexican American answer to everything. Tape.. scotch tape. Wow.

As a hispanic, this guy is a no-class embarrassment. I am NOT your 'gente' homie.

I want to shut down my gas furnace, what are the steps?? sorry but the music is distracting from hearing you but thanks.

I repaired so many Fure brick chambers in Manhattan that sometimes they were so huge, they had to shut down for a week in order for me to work on the inside..In some cases..I could stand up...thats how massive they were

Orale homie puro jale 🤙

How much more than your standard float?

you replaced the oil filter and pump filter and nozzle, do you have to clear the oil line from the filter to the pump if its say 20 feet?

🤟💯🌎

The music sucks

Nice to see how patiently and carefully you did this job! I was waiting to see what the tank filter, pump screen and nozzle looked like with all that water and sludge in the tank, and sure enough, smag all over the place!

Do you have to add the cement on the flow collar hood, rear and front panel on the willaimson?

If you make over a 150k a year I can get you ripped!!!💪💪💪💪

I’m upgrading from oil to gas steam and I was recommended the feeder but a friend who’s a master plumper advice to steer away from the automatic feeder because they could flood the house if it’s stays open or fail , is this true? Is there a way to use and avoid this issue ? Thanks

Man thats Beautiful work!!-!!!! How do i get a nest to work with my navien, i do have a taco switching relay hooked up?? Thank you

Hope you are well.I have analyzed your UA-cam Channel and noticed that your content is fantastic but your video optimization section area is not perfectly up to date.SEO score of your video is very low that’s why views,likes,watch time and comments are low. I want to do SEO 5 videos of your channel cost free. Do you want to talk about it for a while?

What? Can’t hear any of your words

This is exactly what I do and I didn’t know I looked like this, this video is dope af! Good stuff man